2025 Honda CR-V Brake Pads in Avon, IN | Hare Honda

A squeal or scrape can be an early warning, while grinding means the friction material is gone and the backing plate is contacting the rotor. A change in pedal feel or stopping distance also deserves prompt attention. An inspection measures the remaining material on all four corners and checks the rest of the system.

• Squeal or scrape during braking
• Grinding noise when the brake pedal is applied
• Longer pedal travel or stopping distance

The service includes replacement with pads matched to the vehicle’s braking system. Rotors, calipers, hardware, and brake fluid condition are assessed alongside the pads because the parts operate as one system. This approach helps identify conditions that could affect the new pads or braking performance.

• Measurement of remaining pad material on all four corners
• Replacement pads matched to the braking system
• Inspection of rotors, calipers, hardware, and brake fluid condition

City traffic, towing, hills, and hard stops can shorten pad life because they increase braking demand. There is no single mileage that accurately applies to every driver or route. Measuring the remaining material on all four corners shows whether replacement is needed now or at a later visit.

• Driving pattern affects wear
• City traffic and hills increase braking use
• Four-corner measurement confirms remaining material

The rotors are inspected along with the pads, calipers, hardware, and brake fluid. If worn pads have reached the backing plate, rotor contact may have changed the condition of the rotor and requires evaluation. Replacing one brake component while ignoring a related problem can reduce the life of the new part.

• Rotor condition is checked during brake service
• Grinding can indicate rotor contact with the backing plate
• Pads and rotors should be assessed as a system

Grinding means the friction material is gone and the backing plate is on the rotor, so continuing to drive can worsen the brake condition. Squealing, scraping, longer pedal travel, or increased stopping distance also calls for prompt inspection. The service visit measures all four corners and assesses the surrounding brake components.

• Grinding means the friction material is gone
• Longer stopping distance requires prompt attention
• Stop driving and book service when grinding occurs

Hare Honda is located at 8693 E US Hwy 36, Avon, IN 46123, and serves nearby communities including Indianapolis, Carmel, Fishers, Brownsburg, Plainfield, and Danville. At the visit, the remaining pad material is measured on all four corners and related components are inspected. You can also review current service specials.

• Schedule online through Hare Honda’s service scheduler
• Call 317-854-4791 for assistance
• Visit the Avon service center at 8693 E US Hwy 36