2023 Honda CR-V Brake Pads in Avon, IN | Hare Honda

A grinding sound means the friction material is gone and the backing plate is contacting the rotor, so stop driving and book service. A technician can measure the remaining material on all four corners and assess the complete braking system.

• Squeal or scrape when braking
• Grinding caused by contact with the rotor
• Longer pedal travel or stopping distance

The service considers the brakes as a system rather than treating the pads in isolation. Brake lines, hoses, and connections are inspected every 20,000 miles under the manufacturer’s published maintenance schedule. The condition found during inspection determines whether additional brake attention is needed.

• Measure remaining pad material at all four corners
• Replace pads matched to the braking system
• Inspect rotors, calipers, hardware, and fluid

City traffic, towing, hills, and hard stops can shorten pad life. Because wear differs by driving conditions and braking habits, a published mileage figure does not determine whether replacement is due. Inspection also helps assess the rotors, calipers, hardware, and fluid alongside the pads.

• City traffic can increase repeated braking
• Towing and hills can ask more of the brake system
• Measurement at all four corners shows remaining material

Rotors, calipers, hardware, and fluid are assessed with the pads because the components operate together. A grinding sound means the backing plate is contacting the rotor and requires prompt attention. Replacing pads while ignoring a related component can shorten the life of the new parts.

• Inspect rotor condition during pad service
• Check calipers and hardware with the brake pads
• Assess brake fluid as part of the system

Grinding indicates that the friction material is gone and the backing plate is on the rotor, which can turn pad work into rotor work. Squealing, scraping, longer pedal travel, and longer stopping distance also warrant an inspection. A technician can measure all four corners and evaluate the rest of the brake system.

• Stop driving if the brakes grind
• Arrange inspection for scraping or unusual squealing
• Address longer pedal travel or stopping distance promptly

Hare Honda is at 8693 E US Hwy 36 in Avon, Indiana, and serves Avon, Indianapolis, Carmel, Fishers, Brownsburg, Plainfield, Danville, and nearby areas. Booking includes measurement of the remaining pad material on all four corners so you can understand whether service is needed now or at a later visit.

• Schedule an appointment online
• Call 317-854-4791 for appointment assistance
• Review current service specials