2019 Honda Fit Oil Filter in Avon, IN | Hare Honda

The manufacturer’s schedule for this model year calls for oil filter replacement every 15,000 miles. Replacing both together gives the fresh oil a clean filtration path instead of sending it through a filter that may already be loaded with debris. Service history and inspection also help determine when the vehicle needs attention.

• Filter replacement is coordinated with the oil change.
• The filter captures debris carried by the oil.
• The filter seal is checked after the engine runs.

The filter is replaced alongside the oil so the lubrication system starts with fresh filtration. The sealing surfaces are renewed at the drain plug when the engine uses a gasket or washer. After the engine runs, the filter seal is checked for leaks before the vehicle leaves service.

• Engine-matched oil filter
• New drain plug gasket or washer where used
• Leak check at the filter seal after running the engine

A loaded filter does not stop the engine getting oil; it stops the engine getting filtered oil. The driver may notice an oil-pressure warning, an engine noisier than usual, or oil that darkens quickly after a change. The manufacturer’s maintenance schedule and the vehicle’s service history determine when replacement is due.

• Debris remains trapped in an increasingly loaded filter.
• The bypass valve can allow unfiltered oil flow.
• Noise or an oil-pressure warning may be noticed first.

Oil filters are not interchangeable across engines because fitment and sealing requirements can differ. The correct filter is selected for the engine actually fitted to the vehicle, without relying on a universal component. A technician can confirm the match during service and check the seal after the engine has been run.

• Engine displacement: 1.5 liters, or 1,498 cc
• Engine configuration: inline-four
• Filter selection is based on engine fitment

Keeping an old filter with fresh oil leaves the new oil passing through the filter’s existing debris load. Once a filter loads, its bypass valve opens and unfiltered oil circulates. The manufacturer’s schedule, an inspection, and the vehicle’s service history determine the appropriate maintenance decision.

• Fresh oil works with a clean filtration path.
• A loaded filter may trigger bypass operation.
• Filter replacement is scheduled every 15,000 miles by the manufacturer.

The service department is located at 8693 E US Hwy 36 in Avon, Indiana. Booking requests the filter matched to the engine actually fitted and replaced alongside the oil. You can also review current service specials before choosing an appointment.

• Schedule appointment online.
• Call Hare Honda at (317) 854-4791.
• Visit the Avon service location at 8693 E US Hwy 36.