Hare Honda

2013 Honda Crosstour Oil Filter

Honda Oil Filter service at Hare Honda in Avon, IN

Frequently asked questions

Frequently Asked Questions

6 common questions answered

Is the oil filter replaced every time a 2013 Honda Crosstour has its oil changed?Yes, replacing the oil filter with the oil is the appropriate approach for a 2013 Honda Crosstour.

The filter holds debris carried away by the oil and can load over time. Once loaded, its bypass valve opens and unfiltered oil circulates, so stretching one filter across two oil changes can reduce filtration. The manufacturer's maintenance schedule does not establish an interval for this model year; service history and inspection can help guide decisions.

  • Filter replacement occurs alongside the oil service.
  • The filter is matched to the 3.5-liter V6 engine.
  • The seal is checked for leaks after the engine runs.
What is included in an oil filter replacement on a 2013 Honda Crosstour?An oil filter replacement includes an engine-matched filter, applicable sealing hardware, and a post-service leak check.

The filter is selected for the engine actually fitted to the 2013 Honda Crosstour. Where the engine uses a drain plug gasket or washer, that component is renewed. After the engine has been run, the filter seal is checked for leaks before the service is complete.

  • A filter matched to the engine's specification.
  • A new drain plug gasket or washer where the engine uses one.
  • A check for leaks at the filter seal after the engine runs.
What happens if the oil filter on a 2013 Honda Crosstour is not replaced?If the filter is not replaced, it can load with debris and allow unfiltered oil to circulate through the engine.

A loaded filter does not stop the engine getting oil; it stops the engine getting filtered oil. The bypass valve opens when the filter loads, allowing oil flow while bypassing filtration. That is why a filter replacement is performed with the oil rather than assuming an old filter can serve another change.

  • Debris remains trapped in an aging filter.
  • The bypass valve can open as the filter loads.
  • Oil may circulate without effective filtration.
Does a 2013 Honda Crosstour need a specific oil filter?Yes, the filter must be matched to the 3.5-liter, 3,471 cc six-cylinder V6 engine.

Filters are not interchangeable across engines because fit and filtration requirements differ. Hare Honda matches the filter to the engine actually fitted to the 2013 Honda Crosstour without relying on a generic selection. The correct match supports proper installation and allows the filter seal to be checked after the engine runs.

  • The engine displacement is 3.5 liters.
  • The engine displacement is 3,471 cc.
  • The engine has six cylinders in a V6 layout.
Can the oil be changed on a 2013 Honda Crosstour without changing the filter?Oil can be drained and replaced without replacing the filter, but the filter should be replaced with the oil.

The filter retains debris removed from the oil, and a loaded filter can open its bypass valve so unfiltered oil circulates. Replacing only the oil leaves the existing filtration component in service. The vehicle's service history and an inspection may inform maintenance decisions, while the manufacturer's maintenance schedule does not establish an interval for this model year.

  • Fresh oil does not refresh an old filter.
  • A loaded filter can allow unfiltered oil flow.
  • Replacing both supports continued filtration.
How do I book an oil and filter service at Hare Honda?Book online through Hare Honda's service scheduler or call 317-854-4791.

Hare Honda is at 8693 E US Hwy 36 in Avon, Indiana, serving Avon and nearby communities. Online booking lets you request an oil and filter service for your 2013 Honda Crosstour, including an engine-matched filter and a filter-seal leak check after the engine runs. You can also review current service specials before arranging your visit.