2012 Honda Crosstour Brake Pads in Avon, IN | Hare Honda

Squealing or scraping may be an early warning that the pads are wearing. Grinding means the friction material is gone and the backing plate is contacting the rotor, so continued driving can cause additional damage. An inspection measures the pads at all four corners and evaluates the rest of the system.

• Squeal or scrape when braking
• Grinding noise during a stop
• Longer pedal travel or stopping distance

The pads are selected to match the vehicle’s braking system. The surrounding components are assessed because brakes wear as a system, and replacing pads while ignoring a problem with the rotors, hardware, calipers, or fluid can shorten the life of the new parts. Hare Honda can complete this evaluation in Avon.

• Measurement of remaining pad material on all four corners
• Replacement with pads matched to the braking system
• Inspection of rotors, calipers, hardware, and brake fluid

City traffic, towing, hills, and hard stops all shorten pad life. There is no mileage figure to apply to every driver or vehicle. The manufacturer’s maintenance schedule does not specify an interval for this model year, so a technician should measure the remaining material and assess the complete brake system.

• City traffic increases braking frequency
• Towing and hills place additional demand on the brakes
• All-four-corner measurement shows current wear

The rotors are inspected with the pads, along with the calipers, hardware, and brake fluid. If grinding has allowed the backing plate to contact a rotor, the rotor may require attention based on its condition. Assessing the system together helps prevent new pads from being installed while a related brake problem is overlooked.

• Rotors are inspected during pad service
• Grinding indicates friction material is gone
• Component condition determines the next repair

Squealing, scraping, longer pedal travel, or increased stopping distance also call for prompt inspection. Continued driving with worn pads can affect the rotors and may reduce braking control. Hare Honda can measure the pads at all four corners and inspect the complete brake system.

• Grinding means stop driving and arrange service
• Longer stopping distance needs prompt attention
• Rotors, calipers, hardware, and fluid should be assessed together

Hare Honda is located at 8693 E US Hwy 36 in Avon, Indiana, and serves customers from Avon and nearby areas. When booking, mention the brake symptoms and the 2012 Honda Crosstour so the service visit can focus on measuring the pads and inspecting the related components. You can also review current service specials.

• Schedule online through Hare Honda service
• Call 317-854-4791
• Visit 8693 E US Hwy 36, Avon, IN 46123